78.5% 78.5% 76% 78.5% 80% 80% 80.5% no load power consumption< 0.3w erp step2 compliant meet eisa 2007 (energy independence and security act) 2 class power (without earth pin) protections: short circuit / overload / over voltage / over temperature fully enclosed plastic case approvals: ul / cul / bsmi / cb / fcc pass lps for full series 2 years warranty universal ac input / full range pole usa plug specification gs12u05-p1i GS12U07-P1I gs12u09-p1i gs12u12-p1i gs12u15 -p1i gs12u18-p1i gs12u24-p1i order no. safety model no. dc voltage rated current output setup, rise, hold up time voltage range frequency range efficiency (typ.) ac current input inrush current (max.) leakage current (max.) safety standards safety & emc working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note plug cable overload over voltage 9v 7.5v 5v 12v 15v 18v 24v gs12u12 gs12u15 gs12u18 gs12u24 1.33a 1.6a 2.0a 1.0a 0.8a 0.67a 0.5a current range 0 ~ 1.33a 0 ~ 1.6a 0 ~ 2.0a 0 ~ 1.0a 0 ~ 0.8a 0 ~ 0.67a 0 ~ 0.5a ripple & noise (max.) note.2 90mvp-p 90mvp-p 75mvp-p 120mvp-p 150mvp-p 180mvp-p 200mvp-p voltage tolerance note.3 line regulation note.4 load regulation note.5 3.0% 3.0% 1.0% 1.0% 1.0% 1.0% 1.0% 5.0% 4.0% 4.0% 5.0% 1.0% 1.0% 4.0% 4.0% 3.0% 3.0% 3.0% 3.0% 2.0% 2.0% 500ms, 20ms, 30ms/230vac at full load 500ms, 20ms, 10ms/115vac 90 ~ 264vac 135 ~ 370vdc 47 ~ 63hz 0.31 a / 230vac a / 115vac 0.16 cold start 25a / 115vac 45a / 230vac 0.25ma / 240vac >105% rated output power 115% ~ 135% ul60950-1, csa22.2, bsmi cns14336 approved withstand voltage isolation resistance i/p-o/p:3kvac i/p-o/p: / 25 / 70% rh 100m ohms / 500vdc 1414.6khrs min. mil-hdbk-217f (25 ) 0 ~ +50 (refer to "derating curve") 20% ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.03% / (0 ~ 40 ) 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes 65*47*26.5mm (l*w*h) 1.all parameters are specified at 115vac input, rated load, 25 70% rh ambi ent. 2.ripple & noise are measured at 20mhz by using a 12" twisted pair terminated w ith a 0.1uf & 47uf capacitor. 3.tolerance: includes set up tolerance, line regulation, load regul ation. 4.line regulation is measured from low line to high line at rated load. 5.load regulation is measured from 10% to 100% rated load. 6.the over temperature protection (otp) is the built-in function of the c ontrol ic (u1). the activating level described above is based on the specif ication provided by the ic manufacturer. connector gs12u09 gs12u07 gs12u05 rated power 12w 12w 12w 12w 10w 12.06w 12w standard type p1i: 2.1 * 5.5 * 9.5mm turning fork type, center positive for s tock ; other type available by customer requested standard type ul1185 6ft (4ft only for 5v output) for stock ; other type avail able by customer requested 10 ~ 12w ac-dc single output wall-mounted type g s 1 2 u s e r i e s features : protection type : hiccup mode, recovers automatically after fault con dition is removed protection type : clamp by zener diode environment protection u1 tj 140 typically (u1) detect on main control ic protection type : shut down o/p voltage, recovers automatically after t emperature goes down over temperature note.6 packing 0.15kg ; 100pcs / 16kg / carton file name:gs12u-spec 2011-06-14 compliance to cns13438 class b fcc part 15 / cispr22 class b, emc emission
mechanical specification file name:gs12u-spec 2011-06-14 ul1185 16awg 1230 50mm for 5v~9v ul1185 18awg 1830 50mm for 12 v~24v 26.5 1 17 1 65 1 47 1 9.5 0.5mm id 2.1 x od 5.5 c"+" 6.3 0.3 10 ~ 12w ac-dc single output wall-mounted type g s 1 2 u s e r i e s derating curve static characteristics(24v) unit:mm plug assignment standard plug: p1i p/n center output + p1i 12.7 0.4 1.5 0.2 input voltage(vac)60hz ta ( ) load (%) 0 10 20 30 40 70 100 50 50 90 70 120 110 160 140 200 180 240 220 264 output voltage (v) output ripple (mvp-p) 28 250 32 300 24 200 20 150 16 100 12 50 8 25 30 10mm
|
